Pointe 180 Semi-Automatic Clinical Analyzer

The Pointe 180 is a small, semi-automated bench top chemistry analyzer that can read and calculate results of endpoint, initial rate, kinetic rate and batch kinetic assays. The analyzer can use single point calibration by standard/factor, multi-point calibration with point to point curve fit, percent absorbance and rate by standard or factor. It is equipped with graphic software, 37 °C.

\

Printer

Streamlined operations due to on-board printer

\

Easy Operations

Easy operations due to step by step commands

\

Light Weight

Portable and light weight design for effortless re-positioning

\

Enhance Lamp Life

Enhanced lamp life due to automatic shut off after 15 minutes of non-use

1.800.445.9853

Key Markets

 

  • Educational/Research
  • Veterinary

“BS-200 is very easy to assay and maintain. The QC for assays is good and the price of reagents are very reasonable. The technical service is great. We are very happy to have it at the lab.” — Example

TBA

TBA

Enhanced Performance

reads, calculates and prints test results under three seconds

Greater Reliability

with automatic flagging of abnormal test results

Cost Savings

because there is no scheduled maintenance required

Method:

End point, kinetic bichromatic

Measurement Range and Accuracy:

0.0 to 2.50 Absorbance Units (A)

+/- (1% of the reading + 0.005 A) at 1.5A

+/- (2% of the reading + 0.005 A) at 1.5-2A

Reagent Reaction Temperature:

37°C

Sample:

Whole blood, serum, plasma

Light Source:

Tungsten halogen lamp with lamp-saver feature

Wavelengths:

6 filter wheel (340-600 nm)

Filter Type:

Multiple-cavity sealed interface

Calculation Modes:

Single point calibration by standard or factor, multipoint calibration with point to point curve fit, multipoint percent absorbance rate standard or factor

Throughput:

Reads, calculates and prints results in 3 seconds

Positions:

Built in 37°C incubation block with 12 stations

Removable Flow Cell (Reduced Reagent Consumption):

No

Minimum Sample Volume:

1 mL for 12 mm tube

Patient Storage Data:

Up to 60 tests

Vessels:

12 mm round is standard

Printer:

Built-in thermal dot matrix

Display Type:

Alphanumeric, 16 character, LCD

Voltage:

110-120/220-240 VAC from 50 to 60 Hz

Dimensions (L x W x H):

24 x 34 x 10 cm

Weight:

Approximately 10 lbs (4.5 Kg)

Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.

Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.

Instrument Specific Reagents

Acid Phosphatase

Albumin

Alkaline Phosphatase

ALT (SGPT)

Amylase

AST (SGOT)

Direct Bilirubin

Total Bilirubin

BUN

Calcium

Cardiac Risk (Cholesterol, HDL and LDL)

Cardiac Risk 2 (Choleterol, HDL and Triglyceride)

Chloride

Cholesterol

Creatine Kinase

Carbon Dioxide

Creatinine

Hemoglobin

Y-Glutamyl Transferase

Glucose Hexokinase

Glucose Oxidase

Glycohemoglobin

HDL – Cholesterol

Total Iron

Lactate Dehydrogenase

Lipase

Magnesium

Phosphorus

Total Protein

Triglycerides

Uric Acid

UIBC

TIBC

Fructosamine

Alcohol

CK-MB

Microalbumin

Microprotein

Hemoglobin A1c

Like what you see? Request a Demo Today